集束管是在生产时即通过外;げ憬喔⒐苘鲚驮谝黄 , 提供多根路由的产品。网络升级时,微缆可在其中任一单根微管中吹入和吹出,节约建设管蹊径由的用度。该产品能增添外;す苤械奈⒐苁,并使单位空间内的光纤数目最大化。集束管可以通过直埋或者人工牵引气吹方法布入外;す苤,再凭证市场需求在每根微管中气吹微缆。集束管被普遍应用于FTTx, 城域网和主干网中。
产品特点
通例集束管
● 集束管出厂时带有聚乙烯护套 , 常用结构有 7 孔 , 4 孔 , 3 孔和 2 孔等
● 多根路由一次布放 , 节约敷设用度
● 接纳标准卷盘运输
● 集束管敷设与古板管道敷设所使用的工具和装备相同 ,无特殊要求
● 多根路由供未来扩容
阻燃集束管
● 低烟无卤阻燃质料
● 尺寸规模为 1.91~7.62cm
● 防火品级(UL94 V-0)
● 低烟性能提高燃烧时能见度
● 无卤质料,使用清静
● 产品耐酸耐氧化,镌汰对人和装备的清静隐患
排式集束管
● 排式集束管由多根微管通过一层薄 HDPE 质料并排组成,且单根微管易于疏散 , 常用结构有 6 孔 , 4孔和 2 孔
● 排式形状易于在狭窄缝槽中敷设 , 也可通过开槽 , 直埋以及水平挖浅沟等方法敷设
● 节约挖沟土壤转运量 , 利于交通恢复
● 与古板管道施工使用相同的工具和装备,无需特殊工具
规格参数
产品规格 |
2×5/3.5 |
2×10/8 |
4×5/3.5 |
4×7/3.5 |
4×10/8 |
4×12/10 |
7×5/3.5 |
7×7/3.5 |
7×10/8 |
7×12/10 |
7×14/10 |
12×5/3.5 |
12×7/3.5 |
19×5/3.5 |
24×5/3.5 |
24×7/3.5 |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
外径参考值(mm) |
12 |
22×12 |
12×12 |
16×16 |
22×22 |
32×26 |
17 |
23 |
32 |
42 |
42 |
28×26 |
29.6×26.8 |
27 |
30 |
42 |
最小壁厚(mm) |
1.0 |
1.0 |
1.0 |
1.0 |
1.0 |
4.0 |
1.0 |
1.0 |
1.0 |
3.0 |
3.0 |
4.0 |
1.0 |
1.0 |
1.0 |
1.0 |
最小壁厚(mm) |
240 |
440 |
240 |
320 |
440 |
840 |
340 |
460 |
640 |
840 |
840 |
266 |
592 |
540 |
600 |
800 |
可遭受内压 |
1.38Mpa |
|||||||||||||||
内壁摩擦系数 |
≤0.1 |
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.